Delivery Requirements
Delivery Requirements for Spa Solutions Store
This page identifies all you need to consider prior to your delivery from Spa Solutions Store. You will find the specific access dimensions and electrical requirements for your chosen product, along with relevant points to consider.
Aside from meeting the dimensional and electrical requirements, you will need an area of firm, level ground on which to site your equipment.
Spa Solutions Store offers FREE delivery and installation across Mainland Turkey.
When purchasing a new product, you will need to consider:
- Access dimensions (varies between models)
- Electrical requirements (varies between models)
- Level ground (firm area)
- Sufficient space
If you need any help or advice, do not hesitate to call the Spa Solutions Store team.
Width and Height
Our absolute minimum width and height requirements for each product model are available on this page.
Please check the minimum width and height, bearing in mind any possible obstructions — these typically include gate frames, window sills, and drain pipes, to name but a few.
Note: Deliveries are completed using a Spa Dolly — a specific delivery trolley requiring minimal access. Consequently, all dimensions supplied are the minimum required, including the delivery system.
If you have any concerns regarding your delivery, call our team at +90 532 581 08 77 and we will happily advise.
Electrical Requirements
13 AMP Requirements
13 amp models require an outdoor waterproof plug socket with RCD protection on a dedicated supply within 1.5 to 4 meters of the location.
32 AMP Requirements
These models require a 32-amp supply on HO7 6mm 3core cable with RCD protection. A commando socket with local isolation is required between 2 – 3 meters of the location, complete with ‘male’ plug and 8 meters of ‘tail end’ (also HO7 6mm 3core cable). The tail-end is hard-wired to the equipment by our engineers, then simply plugged in to complete.
- The commando socket supply DOES NOT require your electrician present on installation. However, a 32 amp ‘hard-wired’ supply WILL REQUIRE YOUR ELECTRICIAN PRESENT ON INSTALLATION to complete the wiring connection.
A new RCD circuit breaker must be used for your installation. Do not use an existing breaker, as its condition is unknown. The equipment must be connected to a dedicated RCD breaker that is not shared with any other equipment. Do not use an extension or plug type cords of any kind.
40 AMP Requirements
A 40 amp supply using HO7 6mm 3core cable with local isolation via rotary isolator, terminated with an 8-meter tail. A 40 amp breaker is required. The supply should feed directly from a suitable source (typically your domestic fuse box) to the rotary isolator, which is typically mounted 2 meters from the installation area. An 8-meter ‘tail end’ is required from the isolator to the equipment – the tail is ‘hard wired’ to the equipment by an approved electrician*. Please note; the long tail is required to allow perfect siting and orientation of the equipment.
*NOTE: THE 40 AMP SUPPLY ABOVE WILL REQUIRE YOUR ELECTRICIAN ON-SITE DURING THE INSTALLATION TO COMPLETE THE HARD WIRED CONNECTION.
Spa Dolly
The spa dolly is a specifically designed installation tool. The dolly holds the equipment upright, minimizing the space required, allowing a safe and hassle-free installation.
Contact Information
Spa Solutions Store by Sauna Dekor
VAT Number: 7530587794
Address: IOSB Metal Is Basaksehir, Istanbul, Turkey
Telephone: +90 532 581 08 77
Email: info@saunadekor.com
